FEATURES
Frequency: 30MHz-300MHz
VSWR: 2.0:1
Power Handling: 1000W
Connection Type: N Female
Balun Type Transform Ratio: 4:1
Low Return Loss
OBC-033-1KW-4 Biconical Antenna is suitable for a wide array of modern telecommunications systems and EMI testing
SKU: OBC-033-1KW-4
Categories: Biconical Antenna, RF Antenna
$2,210
DESCRIPTION
Biconical antenna is a vertically polarized omnidirectional antenna. Its frequency range is 30MHz to 300 MHz. its pattern stability is better.Biconical antenna model OBC-033-1KW-4 is used for transmission and immunity test to meet various EMC standards. Its broadband characteristics make it an ideal choice for a wide range ofEMI testing applications, including demonstrating compliance with FCC, CE, MIL-STD, RTCADO-160 andother requirements.
OBC-033-1KW-4 biconical EMC broadband antenna has durable aluminum alloy, and we powder coated them toimprove corrosion resistance. Its features include a gamma matching rod, which avoids the immersion between275 MHz and 290 MHz common to other biconical antennas.
The OBC-033-1KW-4 model is used for radiation and immunity testing to meet various EMC standards. Its frequency range is 30 MHz to 300 MHz. The broadband characteristic of biconical antenna makes it an ideal choice for scanning measurement and automatic measurement systems.Biconical antennas can be used formany applications, in which half-wavedipoles have been used traditionally.An enourmous reduction of measurement time can be achieved,because the time consuming tuning of the antenna elements to the half wavelength is not needed, an important condition for sweeped broadband measurements. In typical dipole applications several discrete frequencies are measured, in contrast the bi conical antenna allows continuous sweeps, where site anomalies are discovered much easier.
Notwithstanding the above applications, the OBC-033-1KW-4 can also be used for test site comparisons, shielding effectiveness tests of large enclosures, field monitoring, site surveys and other general purposes.
FEATURES
Low return loss
Linear gain with frequency
EMC and EMI testing
Radio link testing
APPLICATIONS
Broadband RX-Antenna for Emission Testing (20-300 MHz)
TX-Antenna for Immunity testing
especially at low frequencies
ELECTRICAL SPECIFICATIONS
Frequency Range: (30-300)MHz
Nominal lmpedance: 50 Ω
Polarization: Linear
Connector: N type female
Power Handling: 1 KW
VSWR: 2.0:1
Impedance: 50 Ohms
Pattern Type: Omnidirectional
Length (mm): 1320
Balun Type’Transform.Ratio: 4:1
